OTHER FILLERS AND MACHINES

RINSERS

16 Head Rinser – 220 Pitch

32 Head Rinser – 110 Pitch

The above rinsers using standard base

DIMENSIONS OF RINSER:

1900 Length x 2000 Width x 2300 Height

WEIGHT:

Approximately 900 kg

REQUIREMENTS:

• Compressed Air: 80 lt/min at 6 Bar.
• Power supply: 3-phase 380 Volt at 50/60Hz (3 kW)
• Product supply: NW40 Pipe (40mm)

MACHINE SPECIFICATIONS AND VERSATILITY:

• This machine is manufactured entirely from stainless steel and engineering plastics, which comply with the food and beverage industry requirements.
• Easy to operate control panel
• Infeed scroll to feed starwheel (Bottle change parts).
• Easy to remove bottle change parts (One set of bottle change parts per bottle size).
• Adjustable rinsing section with bottle grippers, spray nozzles, rotary manifold and pneumatic activating cylinder for no bottle no spray system.
• Mid-section bottle conveyor.
• Main drive with gears.
• Drip tray around machine base. (For hygienic purposes)
• Low maintenance.
• Single stage rinse.

CONTAINER SPECIFICATIONS:

	16 Head rotary rinser	32 Head rotary rinser
Height:	130 mm – 310 mm	130 mm – 310 mm
Diameter:	55 mm – 140 mm	55 mm – 95 mm
Square:	55 mm – 100 mm	55 mm – 90 mm
Rectangular:	55x65 – 95x125 mm	N/A

OPTIONAL EXTRAS:

• Safety guarding around machine
• Additional sets of bottle change parts.
• Vacuum fan mounted on safety guarding.
• Line control between rinser and filler

OPERATING SPEEDS:

• Speeds of 20 – 300 BPM are achievable.
• Final rinsing speeds are determined by bottle and neck design.

top

INLINE PUMP TIME FILLERS

Single to 6 head pump filler

REQUIREMENTS:

• Compressed Air: 110 lt/min at 6 Bar.
• Power supply: 3-phase 380 Volt at 50/60Hz (7 kW)
• Product supply: NW50 Pipe (50mm)

MACHINE SPECIFICATIONS AND VERSATILITY:

• This machine is manufactured entirely from stainless steel and engineering plastics, which comply with the food and beverage industry requirements.
• Easy to operate control panel
• Pneumatic shut-off nozzle.
• Easy adjustment for different bottle sizes (No change parts needed)
• Filling volume adjustment. (Timer setting)
• Bottle stoppers to control the infeed and release of bottles online.
• Product holding tank with pneumatic actuator control valve with level control system.
• Lid on product holding tank. (For Hygienic purpose)
• Easy to clean.
• Mid-section conveyor.

CONTAINER SPECIFICATIONS:

Height:	150 mm – 310 mm
Diameter:	250ml up to 5L Jug

OPERATING SPEEDS:

Speeds of 10 – 72 BPM are achievable.

Final filling speeds are determined by product, viscosity, filling temperature and foaming characteristics as well as bottle design and neck opening.

top

INLINE PISTON FILLERS

Single to 6 head piston filler

REQUIREMENTS:

• Compressed Air: 110 lt/min at 6 Bar.
• Power supply: 3-phase 380 Volt at 50/60Hz (2 kW)
• Product supply: NW50 Pipe (50mm)

MACHINE SPECIFICATIONS AND VERSATILITY:

• This machine is manufactured entirely from stainless steel and engineering plastics, which comply with the food and beverage industry requirements.
• Easy to operate control panel
• Pneumatic shut-off nozzle.
• Easy adjustment for different bottle sizes (No change parts needed)
• Filling volume adjustment. (Set stroke length of cylinder)
• Bottle stoppers to control the infeed and release of bottles online.
• Product holding tank with pneumatic actuator control valve with level control system.
• Lid on product holding tank. (For Hygienic purpose)
• Easy to clean.
• Mid-section conveyor.

CONTAINER SPECIFICATIONS:

Height:	150mm – 310mm
Diameter:	50ml up to 1000ml

OPERATING SPEEDS:

Speeds of 10 – 60 BPM are achievable.

Final filling speeds are determined by product, viscosity, filling temperature and foaming characteristics as well as bottle design and neck opening.

top

20 HEAD SLEEVING MACHINE

Filltech also develops and manufactures other machine types to clients specifications such as the 20 Head sleeving machine.

The purpose of this machine is to pull a cotton sleeve over the bottle after it is filled and sealed.

This is to save on labour and increase production.

We designed the machine out of painted mild steel to save on expenses and because of the use in a dry area.

Click to enlarge

Sleeving Machine